A popular roofing option for commercial businesses and properties is a spray foam roof. They offer the best choice for roofs with a flat or low-slope, which are common on commercial buildings. Additionally, spray foam roofs are durable, long lasting protection for a building and come with several benefits.
When professionally installed, a foam roof can last upwards of 50 years with proper maintenance.
Proper maintenance for a spray roof includes recoating the surface every 5-10 years. To help you further understand your commercial foam roof, we are going to discuss them a little more in-depth today. From the advantages, to more about the recoating process, and a few signs to look for to know it is time for a recoat.
4 Advantages of A Commercial Foam Roof
- Seamless – Having no seams or joints, your foam roof will prevent outside water and air from passing through to your home.
- Waterproofing Layers – We apply premium waterproofing layers to resist penetration of water and vapors that can leak into your home through your roof.
- Insulating – Foam roofs provide thermal resistance with less material than any other roof insulation resulting in energy savings for you.
- Lightweight – Weighing in considerably less than most other roofing materials, foam roofs can often be installed on top of existing, built-up roofs.
Recoat Should Happen Every 5-10 Years
Many business or commercial property owners often question how frequently work should be done on various items throughout their building. The roof is no exception and if the building has a foam roof, it should be recoated every 5-10 years. Many roofing manufacturers require a professional roofing inspection to be completed and recoated to keep the warranty valid. Be sure to talk with your local roofer to fully understand your warrant and its requirements.
Having a professional roofer inspect your commercial foam roof every few years is good practice. They will be able to assess the surface for punctures or damage and provide detailed images and notes about the health of the roof. If your roofer recommends a recoat on your foam roof, it is best to have it done sooner than later. While a foam roof may look great on the surface, having it recoated could provide additional benefit and the process will be completed much smoother now.
Signs Your Roof Is Ready For A Recoat
Being an informed business owner and knowing what to look for when inspecting your commercial foam roofing system is essential for its health and proper maintenance. Below are a few signs to look for while inspecting your roof to know that it is time for a recoat.
- Blisters: Over time, it is natural for your flat roof to release gasses and a few blisters pop up on your foam roof. Blistering is a problem for your commercial foam roof if there are several small blisters either all over the roof or even in a small, designated area. Blisters can also cause water to pool in the valleys, which will lead to further issues within the roof. Do not pop or cut the blister if you find them as they can cause seepage through the entire roofing system. Contact your local roofer to perform a professional roof inspection as repair will require carefully cutting the blister and recoating the roof.
- Peeling: When the coating starts to peel from the lower layers of the roofing system, it is a sign that your roof is ready for a recoat. Also called delamination or separation, this is caused by a number of things. Either the roof was not clean when the new foam was applied, temperature fluctuation has caused it to separate, or moisture has found its way between the layers. Regardless of the cause, peeling needs to be repaired in a timely fashion and will require a recoat.
- Exposed Foam: The top coat of the foam roof can be damaged, worn away, or punctured over time and cause the foam to be exposed to the elements. Especially in areas of high sun, exposed foam can be dangerous to the roofing system and should be recoated immediately when discovered. Areas that are exposed can be cleaned and recoated, but sometimes the entire roof may need to be recoated. Talk with your local roofer to see what has damaged your roof and the best solution for repair.
- Water Pooling: There is no denying that when water sits on a roof, it can cause damage. When water pools on a foam roof and does not evaporate or run off, it causes the material below to soak and break down. Further, pooling water can easily find its way through the entire roofing system and inside your building or business, causing extensive damage. Discuss the cause of your water issues with your local roofer and understand that a roofing recoat is likely to ensure the integrity of the roofing system will be restored.
Work With Your Local Roofer
While no one really enjoys needing to call a roofer, it is important to know that your roof is properly being cared for. A commercial foam roof has numerous advantages and is a good investment when it is recoated every 5-10 years. Knowing and understanding what to look for will help you determine when it is best for you to have your roof recoated. Work with your local roofer to further understand your commercial foam roof and have them provide you with a professional inspection.
If you are located in the East Valley, contact Craven Construction for all of your commercial foam roofing needs. Our team is certified foam roof installers and has nearly two decades of experience with foam roofs! Call our office to speak to our roofing expert and schedule your FREE estimate for repair, recoat, or new roof installation.
Is your commercial foam roof in need of recoat?
About Craven Construction
Craven Construction is dedicated to providing our customers with honest and reliable roofing services. With over two decades of residential and commercial experience, we are here to serve you and all of your roofing needs.
Our team of experienced roofers is licensed and knowledgeable in working with all types of roofing. We offer high quality roofing services and are capable of getting your project completed in a timely, efficient manner.